International Harvester D-219 vs International Harvester 184

11 material differences · fewer than 12

Tractor one

1962–1966

No measured PTO figure

Tractor two

1977–1980

No measured PTO figure

Which should you choose?

Read our verdict on the D-219 and the 184 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester D-219 and International Harvester 184, field by field
Field	D-219	184	Gap
Engine
Engine power, claimed claimed	19 hp	17.7 hp	+6% D-219
Engine declared	INTERNATIONAL-HARVESTER DD-74	INTERNATIONAL HARVESTER C-60	differs
Displacement declared	1.22 L	0.98 L	+25% D-219
Transmission
Top speed declared	11.2 mph · 18 km/h	7.5 mph · 12 km/h	+50% D-219
Clutch declared	Pedal operated dry Fichtel & Sachs single disc clutch	—	—
Hydraulics & hitch
Pump flow declared	5.2 gpm · 19.5 L/min	2.0 gpm · 7.6 L/min	+157% D-219
Three-point lift at ends declared	661 lb · 300 kg	—	—
Rear PTO speeds declared	540 rpm	1800 rpm	differs
Weight & dimensions
Unladen weight declared	2,802 lb · 1,271 kg	1,618 lb · 734 kg	+73% D-219
Maximum permissible mass declared	4,299 lb · 1,950 kg	—	—
Wheelbase declared	68.1 in · 1,730 mm	64.0 in · 1,626 mm	+6% D-219
Length declared	105.2 in · 2,672 mm	94.0 in · 2,388 mm	+12% D-219
Width declared	62.2 in · 1,581 mm	52.0 in · 1,321 mm	+20% D-219
Height declared	55.0 in · 1,397 mm	49.0 in · 1,245 mm	+12% D-219
Ground clearance declared	13.9 in · 354 mm	13.0 in · 330 mm	+7% D-219
Turning radius, braked declared	8.0 ft · 2.45 m	8.0 ft · 2.44 m	—
Fuel tank declared	28.5 qt · 27.0 L	30.0 qt · 28.4 L	—

Source

Source