International Harvester D-217 Standard vs Kramer KL 200

9 material differences · fewer than 12

Tractor one

1956–1962

No measured PTO figure

Tractor two

1958–1967

No measured PTO figure

Which should you choose?

Read our verdict on the D-217 Standard and the KL 200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 1 fields identical or within 5%, which is not counted as material

International Harvester D-217 Standard and Kramer KL 200, field by field
Field	D-217 Standard	KL 200	Gap
Engine
Engine power, claimed claimed	16.8 hp	17.7 hp	+6% KL 200
Engine declared	INTERNATIONAL-HARVESTER DD-74	—	—
Displacement declared	1.22 L	—	—
Maximum torque declared	—	64 lb·ft · 86 N·m	—
Transmission
Top speed declared	11.2 mph · 18 km/h	12.4 mph · 20 km/h	+11% KL 200
Clutch declared	—	Single-plate dry clutch from Fichtel & Sachs	—
Hydraulics & hitch
Pump flow declared	5.0 gpm · 19.0 L/min	4.2 gpm · 16 L/min	+19% D-217 Standard
Pressure declared	—	1,707 psi · 118 bar	—
Three-point lift at ends declared	661 lb · 300 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	2,612 lb · 1,185 kg	2,800–3,153 lb · 1,270–1,430 kg	differs
Maximum permissible mass declared	—	4,012 lb · 1,820 kg	—
Wheelbase declared	68.1 in · 1,730 mm	69.5–71.9 in · 1,765–1,825 mm	differs
Length declared	105.2 in · 2,672 mm	111.0–113.4 in · 2,820–2,880 mm	differs
Width declared	62.2 in · 1,581 mm	58.7–59.1 in · 1,490–1,500 mm	differs
Height declared	55.0 in · 1,397 mm	59.8–61.8 in · 1,520–1,570 mm	differs
Ground clearance declared	13.9 in · 354 mm	13.8–15.7 in · 350–400 mm	differs
Turning radius, braked declared	8.0 ft · 2.45 m	—	—
Fuel tank declared	28.5 qt · 27 L	25.4 qt · 24 L	+13% D-217 Standard

Source

Source