International Harvester 824 (A) vs Renault 75-12 LS

7 material differences · fewer than 12

Tractor one

1971–1974

No measured PTO figure

Tractor two

1985–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 824 (A) and the 75-12 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester 824 (A) and Renault 75-12 LS, field by field
Field	824 (A)	75-12 LS	Gap
Engine
Engine power, claimed claimed	73.0 hp	69.1 hp	+6% 824 (A)
Engine declared	INTERNATIONAL-HARVESTER D-239 or D-246	MWM D 226-4	differs
Displacement declared	—	4.15 L	—
Maximum torque declared	185 lb·ft · 251 N·m	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry LuK single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	7.7 gpm · 29.2 L/min	8.0 gpm · 30.3 L/min	—
Pressure declared	2,988 psi · 206 bar	—	—
Three-point lift at ends declared	—	8,433 lb · 3,825 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,934 lb · 3,145 kg	6,592 lb · 2,990 kg	—
Maximum permissible mass declared	—	12,456 lb · 5,650 kg	—
Wheelbase declared	83.5 in · 2,120 mm	93.3 in · 2,370 mm	+12% 75-12 LS
Length declared	131.4 in · 3,337 mm	152.4 in · 3,870 mm	+16% 75-12 LS
Width declared	78.3 in · 1,990 mm	73.2 in · 1,860 mm	+7% 824 (A)
Height declared	98.0 in · 2,489 mm	97.8 in · 2,485 mm	—
Ground clearance declared	17.8 in · 453 mm	19.3 in · 490 mm	+8% 75-12 LS
Turning radius, braked declared	12.5 ft · 3.80 m	13.3 ft · 4.05 m	+7% 75-12 LS
Fuel tank declared	74.0 qt · 70.0 L	87.7 qt · 83.0 L	+19% 75-12 LS

Source

Source