IMT 5100/5106 vs Massey Ferguson MF 4260 (A)

9 material differences · fewer than 12

Tractor one

1982–1992

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 5100/5106 and the MF 4260 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

IMT 5100/5106 and Massey Ferguson MF 4260 (A), field by field
Field	5100/5106	MF 4260 (A)	Gap
Engine
Engine power, claimed claimed	103.5 hp	98.7 hp	—
Engine declared	IMR-PERKINS S 46/T (A 6.354)	Perkins 1006.6 HR-4	differs
Displacement declared	5.80 L	5.99 L	—
Maximum torque declared	256 lb·ft · 347 N·m	270 lb·ft · 366 N·m	+5% MF 4260 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Fichtel & Sachs single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.3 gpm · 39.0 L/min	—	—
Pressure declared	—	2,031 psi · 140 bar	—
Three-point lift at ends declared	8,003 lb · 3,630 kg	10,185 lb · 4,620 kg	+27% MF 4260 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,177 lb · 5,070 kg	8,223 lb · 3,730 kg	+36% 5100/5106
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	108.3 in · 2,750 mm	102.7 in · 2,609 mm	+5% 5100/5106
Length declared	178.0 in · 4,521 mm	172.8 in · 4,390 mm	—
Width declared	82.7 in · 2,100 mm	78.3 in · 1,990 mm	+6% 5100/5106
Height declared	111.0 in · 2,820 mm	106.8 in · 2,713 mm	—
Ground clearance declared	18.1 in · 460 mm	13.8 in · 350 mm	+31% 5100/5106
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	227.2 qt · 215.0 L	213.5 qt · 202.0 L	+6% 5100/5106

Source

Source