IMT 5100/5106 or Massey Ferguson MF 4260 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the Massey Ferguson MF 4260 (A): three-point lift.
- The Massey Ferguson MF 4260 (A) suits loader and hydraulic implement work better on this data: 27% (990 kg / 2,183 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 5100/5106 | MF 4260 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 68.9 kW (92.4 hp)Traktorenlexikon, “IMT 5100/5106” | 69.1 kW (92.7 hp)Traktorenlexikon, “Massey Ferguson MF 4260” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 5100/5106 and the MF 4260 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 5100/5106 and the MF 4260 (A). |
| Which pumps more oil for implements? | 39.0 L/min (10.3 gpm)Traktorenlexikon, “IMT 5100/5106” | — | No figureNo call on hydraulic flow: no figure on record for the MF 4260 (A). |
| Which lifts more on the three-point hitch? | 3,630 kg (8,003 lb)Traktorenlexikon, “IMT 5100/5106” | 4,620 kg (10,185 lb)Traktorenlexikon, “Massey Ferguson MF 4260” | AheadThe Massey Ferguson MF 4260 (A) has 27% more lift (990 kg / 2,183 lb) than the IMT 5100/5106 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,070 kg (11,177 lb)Traktorenlexikon, “IMT 5100/5106” | 3,730 kg (8,223 lb)Traktorenlexikon, “Massey Ferguson MF 4260” | Ahead (a fact, not an advantage)The IMT 5100/5106 is 36% heavier (1,340 kg / 2,954 lb) than the Massey Ferguson MF 4260 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 7,000 kg (15,432 lb)Traktorenlexikon, “Massey Ferguson MF 4260” | No figureNo call on maximum permissible mass: no figure on record for the 5100/5106. |
| Which has the wider choice of gears? | 10 to 12Traktorenlexikon, “IMT 5100/5106” | 12 to 24Traktorenlexikon, “Massey Ferguson MF 4260” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 5100/5106 and the MF 4260 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IMT 5100/5106” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 4260” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “IMT 5100/5106” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 4260” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “IMT 5100/5106” | — | No figureNo call on PTO independence: not stated for the MF 4260 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “IMT 5100/5106” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4260” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1992 | 1997–2001 | Ahead (a fact, not an advantage)The Massey Ferguson MF 4260 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 4260 (A) has 27% more lift (990 kg / 2,183 lb) than the IMT 5100/5106 (both lift at the hitch ends, as stated by the source).
- The IMT 5100/5106 is 36% heavier (1,340 kg / 2,954 lb) than the Massey Ferguson MF 4260 (A) (both unladen weight, as stated by the source).
- The Massey Ferguson MF 4260 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources