12 material differences

Tractor oneHürlimann XN-7081999–2003No measured PTO figureTractor twoJohn Deere 61202003–2006No measured PTO figure

Which should you choose?

Read our verdict on the XN-708 and the 6120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Hürlimann XN-708 and John Deere 6120, field by field
Field	XN-708	6120	Gap
Engine
Engine power, claimed claimed	79.0 hp	79.0 hp	—
Engine declared	Hürlimann 1000.4 W-3	John Deere PowrTech 4.045 TL-070	differs
Displacement declared	4.00 L	4.53 L	+13% 6120
Maximum torque declared	184 lb·ft · 250 N·m	232 lb·ft · 314 N·m	+26% 6120
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% 6120
Clutch declared	Pedal-operated dry SDF single disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	8.9 gpm · 33.7 L/min	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,556 lb · 2,520 kg	9,513 lb · 4,315 kg	+71% 6120
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	80.9 in · 2,056 mm	94.5 in · 2,400 mm	+17% 6120
Length declared	140.2 in · 3,561 mm	168.4 in · 4,278 mm	+20% 6120
Width declared	50.8–64.6 in · 1,290–1,640 mm	85.7 in · 2,178 mm	differs
Height, over the cab declared	83.1 in · 2,110 mm	104.3 in · 2,648 mm	+25% 6120
Ground clearance declared	9.1 in · 230 mm	19.3 in · 490 mm	+113% 6120
Turning radius, braked declared	13.7 ft · 4.17 m	—	—
Fuel tank declared	61.3 qt · 58.0 L	174.4 qt · 165.0 L	+184% 6120

Source

Source