Hürlimann H-658 XA vs VALMET 6250 HiTech

13 material differences

Tractor one

2000–2004

No measured PTO figure

Tractor two

2000–2006

No measured PTO figure

Which should you choose?

Read our verdict on the H-658 XA and the 6250 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Hürlimann H-658 XA and VALMET 6250 HiTech, field by field
Field	H-658 XA	6250 HiTech	Gap
Engine
Engine power, claimed claimed	82 hp	—	—
Engine declared	Hürlimann 1000.4 WT-4	VALMET 420 DSRE or 44 DT	differs
Displacement declared	4.00 L	4.40 L	+10% 6250 HiTech
Maximum torque declared	226 lb·ft · 306 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry SDF single disc clutch	Electrically operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	11.8 gpm · 44.5 L/min	19.4 gpm · 73.5 L/min	+65% 6250 HiTech
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	12,588 lb · 5,710 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,864 lb · 2,660 kg	9,698 lb · 4,399 kg	+65% 6250 HiTech
Maximum permissible mass declared	11,023 lb · 5,000 kg	19,842 lb · 9,000 kg	+80% 6250 HiTech
Wheelbase declared	86.2 in · 2,190 mm	91.6 in · 2,326 mm	+6% 6250 HiTech
Length declared	153.5 in · 3,900 mm	176.2 in · 4,475 mm	+15% 6250 HiTech
Width declared	80.7 in · 2,050 mm	85.8 in · 2,179 mm	+6% 6250 HiTech
Height declared	98.0 in · 2,490 mm	109.1 in · 2,771 mm	+11% 6250 HiTech
Ground clearance declared	15.0 in · 380 mm	17.1 in · 434 mm	+14% 6250 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	95.1 qt · 90.0 L	174.4 qt · 165.0 L	+83% 6250 HiTech

Source

Source