Hürlimann H-468 "Prestige" vs VALMET 6550 HiTech

11 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1998–2006

No measured PTO figure

Which should you choose?

Read our verdict on the H-468 "Prestige" and the 6550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-468 "Prestige" and VALMET 6550 HiTech, field by field
Field	H-468 "Prestige"	6550 HiTech	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.6 hp	—
Engine declared	Hürlimann H-1000.4 W	VALMET 420 DWRE or 44 ET	differs
Displacement declared	4.00 L	4.40 L	+10% 6550 HiTech
Maximum torque declared	182 lb·ft · 247 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated dry SLH single disc clutch	Electrically-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	18.7 gpm · 70.8 L/min	—
Pressure declared	2,611 psi · 180 bar	—	—
Three-point lift at ends declared	6,391 lb · 2,899 kg	12,346 lb · 5,600 kg	+93% 6550 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,790 lb · 3,080 kg	10,406 lb · 4,720 kg	+53% 6550 HiTech
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	90.2 in · 2,290 mm	92.1 in · 2,340 mm	—
Length declared	157.1 in · 3,990 mm	178.0 in · 4,520 mm	+13% 6550 HiTech
Width declared	77.6 in · 1,970 mm	92.9 in · 2,360 mm	+20% 6550 HiTech
Height declared	100.0 in · 2,540 mm	107.1 in · 2,720 mm	+7% 6550 HiTech
Ground clearance declared	16.1 in · 410 mm	17.1 in · 434 mm	+6% 6550 HiTech
Turning radius, braked declared	12.3 ft · 3.76 m	—	—
Fuel tank declared	89.8 qt · 85.0 L	174.4 qt · 165.0 L	+94% 6550 HiTech

Source

Source