Hürlimann H-468 "Prestige" or VALMET 6550 HiTech?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the H-468 "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | H-468 "Prestige" | 6550 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 73.5 kW (98.6 hp)Traktorenlexikon, “Hürlimann H 468 Prestige” | 73.5 kW (98.6 hp)Traktorenlexikon, “Valmet 6550 HiTech” | Not comparableNot comparable on power at the PTO shaft: the H-468 "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the H-468 "Prestige" and the 6550 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the H-468 "Prestige" and the 6550 HiTech. |
| Which pumps more oil for implements? | — | 70.8 L/min (18.7 gpm)Traktorenlexikon, “Valmet 6550 HiTech” | No figureNo call on hydraulic flow: no figure on record for the H-468 "Prestige". |
| Which lifts more on the three-point hitch? | 2,899 kg (6,391 lb)Traktorenlexikon, “Hürlimann H 468 Prestige” | 5,600 kg (12,346 lb)Traktorenlexikon, “Valmet 6550 HiTech” | Not comparableNot comparable on three-point lift: the H-468 "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 468 Prestige”); the 6550 HiTech: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 6550 HiTech”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,080 kg (6,790 lb)Traktorenlexikon, “Hürlimann H 468 Prestige” | 4,720 kg (10,406 lb)Traktorenlexikon, “Valmet 6550 HiTech” | Ahead (a fact, not an advantage)The VALMET 6550 HiTech is 53% heavier (1,640 kg / 3,616 lb) than the Hürlimann H-468 "Prestige" (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 7,500 kg (16,535 lb)Traktorenlexikon, “Valmet 6550 HiTech” | No figureNo call on maximum permissible mass: no figure on record for the H-468 "Prestige". |
| Which has the wider choice of gears? | 15 to 24Traktorenlexikon, “Hürlimann H 468 Prestige” | 36Traktorenlexikon, “Valmet 6550 HiTech” | AheadThe VALMET 6550 HiTech has 50% more forward gears (12 gears) than the Hürlimann H-468 "Prestige" (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the H-468 "Prestige" and the 6550 HiTech. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 468 Prestige” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6550 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Hürlimann H 468 Prestige” | 540/1000 rpmTraktorenlexikon, “Valmet 6550 HiTech” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 6550 HiTech” | No figureNo call on PTO independence: not stated for the H-468 "Prestige". |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann H 468 Prestige” | 4WDTraktorenlexikon, “Valmet 6550 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1989–1998 | 1998–2006 | Ahead (a fact, not an advantage)The VALMET 6550 HiTech is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6550 HiTech is 53% heavier (1,640 kg / 3,616 lb) than the Hürlimann H-468 "Prestige" (both unladen weight, as stated by the source).
- The VALMET 6550 HiTech has 50% more forward gears (12 gears) than the Hürlimann H-468 "Prestige" (both forward gears, as stated by the source).
- The VALMET 6550 HiTech is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the H-468 "Prestige" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the H-468 "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 468 Prestige”); the 6550 HiTech: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 6550 HiTech”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources