Hürlimann H-358 "Prestige" vs John Deere 5300 (A)

10 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the H-358 "Prestige" and the 5300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann H-358 "Prestige" and John Deere 5300 (A), field by field
Field	H-358 "Prestige"	5300 (A)	Gap
Engine
Engine power, claimed claimed	59.1 hp	49.3 hp	+20% H-358 "Prestige"
Engine declared	Hürlimann H-1000.3 W	John Deere 3.029	differs
Displacement declared	3.00 L	2.94 L	—
Maximum torque declared	149 lb·ft · 202 N·m	133 lb·ft · 180 N·m	+12% H-358 "Prestige"
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated dry CARRARO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.5 gpm · 28.5 L/min	11.6 gpm · 43.9 L/min	+54% 5300 (A)
Pressure declared	3,046 psi · 210 bar	3,408 psi · 235 bar	+12% 5300 (A)
Three-point lift at ends declared	3,748 lb · 1,700 kg	3,803 lb · 1,725 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,118 lb · 2,775 kg	4,550 lb · 2,064 kg	+34% H-358 "Prestige"
Wheelbase declared	83.9 in · 2,130 mm	80.7 in · 2,050 mm	—
Length declared	148.0 in · 3,760 mm	139.4 in · 3,541 mm	+6% H-358 "Prestige"
Width declared	70.5 in · 1,790 mm	72.7 in · 1,846 mm	—
Height declared	100.0 in · 2,540 mm	90.1 in · 2,289 mm	+11% H-358 "Prestige"
Ground clearance declared	15.4 in · 390 mm	19.3 in · 490 mm	+26% 5300 (A)
Turning radius, braked declared	—	9.8 ft · 3.00 m	—
Fuel tank declared	74.0 qt · 70.0 L	72.0 qt · 68.1 L	—

Source

Source