9 material differences · fewer than 12
Tractor oneHürlimann D 8001964–1970No measured PTO figureTractor twoSOMECA 1000 Super (TD)1976–1979No measured PTO figure
Which should you choose?
Read our verdict on the D 800 and the 1000 Super (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 800 | 1000 Super (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 92.7 hp | 108.5 hp | +17% 1000 Super (TD) |
| Engine declared | Hürlimann D-800 | FIAT-IVECO 8065.04.207 | differs |
| Displacement declared | 6.12 L | 5.50 L | +11% D 800 |
| Maximum torque declared | 271 lb·ft · 368 N·m | 268 lb·ft · 364 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% 1000 Super (TD) |
| Clutch declared | Pedal operated dry Huerlimann double clutch | Pedal-operated two-stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.4 gpm · 39.5 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,574 lb · 5,250 kg | 7,981 lb · 3,620 kg | +45% D 800 |
| Wheelbase declared | 104.3 in · 2,650 mm | 98.0 in · 2,490 mm | +6% D 800 |
| Length declared | 164.6 in · 4,180 mm | 150.0 in · 3,810 mm | +10% D 800 |
| Width declared | 81.9 in · 2,080 mm | 76.0 in · 1,930 mm | +8% D 800 |
| Ground clearance declared | — | 22.8 in · 580 mm | — |
| Turning radius, braked declared | — | 13.1 ft · 4.00 m | — |
| Fuel tank declared | 126.8 qt · 120.0 L | 124.7 qt · 118.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D 800 sources
- Source: Traktorenlexikon, “Hürlimann D 800”
SOMECA 1000 Super (TD) sources
- Source: Traktorenlexikon, “Someca 1000 S”