Hürlimann D-470 (A) vs VALMET 455/445-4
12 material differences
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1979–1983; 1989–1994). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D-470 (A) | 455/445-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.9 hp | 66.1 hp | +7% D-470 (A) |
| Engine declared | Hürlimann H-1104 or H-1104/6 | VALMET TD-33 DS 4 | differs |
| Displacement declared | 4.56 L | 3.30 L | +38% D-470 (A) |
| Maximum torque declared | 195 lb·ft · 265 N·m | 167 lb·ft · 227 N·m | +17% D-470 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 455/445-4 |
| Clutch declared | Dry SAME double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.3 gpm · 31.5 L/min | 8.3 gpm · 31.6 L/min | — |
| Pressure declared | 2,596 psi · 179 bar | 1,305 psi · 90 bar | +99% D-470 (A) |
| Three-point lift at ends declared | 4,043 lb · 1,834 kg | 5,820 lb · 2,640 kg | +44% 455/445-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,063 lb · 2,750 kg | 5,997 lb · 2,720 kg | — |
| Wheelbase declared | 90.8 in · 2,307 mm | 83.1 in · 2,112 mm | +9% D-470 (A) |
| Length declared | 130.0 in · 3,302 mm | 146.1 in · 3,710 mm | +12% 455/445-4 |
| Width declared | 69.7 in · 1,770 mm | 77.4 in · 1,965 mm | +11% 455/445-4 |
| Height declared | 94.9 in · 2,410 mm | 96.9 in · 2,460 mm | — |
| Ground clearance declared | 17.3 in · 440 mm | 15.9 in · 405 mm | +9% D-470 (A) |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 77.1 qt · 73.0 L | +22% 455/445-4 |
Hürlimann D-470 (A) sources
Source
- Source: Traktorenlexikon, “Hürlimann H 470”
VALMET 455/445-4 sources
Source
- Source: Traktorenlexikon, “Valmet 455”