Hermann Lanz D 28 (TD) vs URSUS C-328

11 material differences · fewer than 12

Tractor one

1948–1952

No measured PTO figure

Tractor two

1963–1968

No measured PTO figure

Which should you choose?

Read our verdict on the D 28 (TD) and the C-328 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Hermann Lanz D 28 (TD) and URSUS C-328, field by field
Field	D 28 (TD)	C-328	Gap
Engine
Engine power, claimed claimed	27.5 hp	27.6 hp	—
Engine declared	MWM TD 115 or TD 15	URSUS S-312 B	differs
Displacement declared	2.85 L	1.96 L	+45% D 28 (TD)
Maximum torque declared	116 lb·ft · 157 N·m	74 lb·ft · 100 N·m	+57% D 28 (TD)
Transmission
Top speed declared	12.4 mph · 20 km/h	14.3 mph · 23 km/h	+15% C-328
Clutch declared	Single plate dry clutch from Fichtel & Sachs	—	—
Hydraulics & hitch
Pump flow declared	—	4.8 gpm · 18.0 L/min	—
Three-point lift at ends declared	—	1,543 lb · 700 kg	—
Rear PTO speeds declared	550 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,858 lb · 1,750 kg	3,646 lb · 1,654 kg	+6% D 28 (TD)
Wheelbase declared	69.3 in · 1,760 mm	72.8 in · 1,850 mm	—
Length declared	111.4 in · 2,830 mm	119.3 in · 3,030 mm	+7% C-328
Width declared	60.6 in · 1,540 mm	66.1 in · 1,680 mm	+9% C-328
Height declared	59.1 in · 1,500 mm	59.1 in · 1,500 mm	—
Ground clearance declared	14.8 in · 375 mm	15.7 in · 400 mm	+7% C-328
Turning radius, braked declared	4.1 ft · 1.25 m	8.8 ft · 2.69 m	+115% C-328
Fuel tank declared	39.1 qt · 37 L	37.0 qt · 35.0 L	+6% D 28 (TD)

Source

Source