Hanomag Perfekt 401 (S) or International Harvester 240 Utility?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Perfekt 401 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 Utility has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The International Harvester 240 Utility suits loader and hydraulic implement work better on this data: 20% (3.8 L/min / 1.0 gpm) more hydraulic flow.
- The International Harvester 240 Utility suits road haulage better on this data: 15% (3.0 km/h / 1.9 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Perfekt 401 (S) | 240 Utility | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 23 kW (31 hp)Traktorenlexikon, “Hanomag Perfekt 401 (S)” | 23.5 kW (31.5 hp)Traktorenlexikon, “IHC 240” | Not comparableNot comparable on power at the PTO shaft: the Perfekt 401 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 Utility has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Perfekt 401 (S) and the 240 Utility. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Perfekt 401 (S) and the 240 Utility. |
| Which pumps more oil for implements? | 19.0 L/min (5.0 gpm)Traktorenlexikon, “Hanomag Perfekt 401 (S)” | 22.8 L/min (6.0 gpm)Traktorenlexikon, “IHC 240” | AheadThe International Harvester 240 Utility has 20% more hydraulic flow (3.8 L/min / 1.0 gpm) than the Hanomag Perfekt 401 (S) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,300 kg (2,866 lb)Traktorenlexikon, “Hanomag Perfekt 401 (S)” | — | No figureNo call on three-point lift: no figure on record for the 240 Utility. |
| Which is heavier, for traction? | 1,780 kg (3,924 lb)Traktorenlexikon, “Hanomag Perfekt 401 (S)” | 1,650 kg (3,638 lb)Traktorenlexikon, “IHC 240” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Perfekt 401 (S) and the 240 Utility. |
| Which has the wider choice of gears? | 6Traktorenlexikon, “Hanomag Perfekt 401 (S)” | 4Traktorenlexikon, “IHC 240” | AheadThe Hanomag Perfekt 401 (S) has 50% more forward gears (2 gears) than the International Harvester 240 Utility (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Perfekt 401 (S) and the 240 Utility. |
| Which is faster on the road? | 20 km/h (12.4 mph)Traktorenlexikon, “Hanomag Perfekt 401 (S)” | 23 km/h (14.3 mph)Traktorenlexikon, “IHC 240” | AheadThe International Harvester 240 Utility has 15% more top speed (3.0 km/h / 1.9 mph) than the Hanomag Perfekt 401 (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Hanomag Perfekt 401 (S)” | 540 rpmTraktorenlexikon, “IHC 240” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | dependent (stops with the clutch)Traktorenlexikon, “IHC 240” | No figureNo call on PTO independence: not stated for the Perfekt 401 (S). |
| Which drives on both axles? | 2WDTraktorenlexikon, “Hanomag Perfekt 401 (S)” | 2WDTraktorenlexikon, “IHC 240” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1964–1967 | 1958–1961 | Ahead (a fact, not an advantage)The Hanomag Perfekt 401 (S) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 240 Utility has 20% more hydraulic flow (3.8 L/min / 1.0 gpm) than the Hanomag Perfekt 401 (S) (both pump flow, as stated by the source).
- The Hanomag Perfekt 401 (S) has 50% more forward gears (2 gears) than the International Harvester 240 Utility (both forward gears, as stated by the source).
- The International Harvester 240 Utility has 15% more top speed (3.0 km/h / 1.9 mph) than the Hanomag Perfekt 401 (S) (both top speed forward, as stated by the source).
- The Hanomag Perfekt 401 (S) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the Perfekt 401 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 240 Utility has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources