14 material differences
Tractor oneHanomag C 2201959–1960No measured PTO figureTractor twoInternational Harvester D-2191962–1966No measured PTO figure
Which should you choose?
Read our verdict on the C 220 and the D-219 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | C 220 | D-219 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 19.6 hp | 19 hp | — |
| Engine declared | Hanomag D 621 | INTERNATIONAL-HARVESTER DD-74 | differs |
| Displacement declared | 1.02 L | 1.22 L | +19% D-219 |
| Maximum torque declared | 58 lb·ft · 78 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.3 mph · 19.8 km/h | 11.2 mph · 18 km/h | +10% C 220 |
| Clutch declared | Single dry clutch from Fichtel & Sachs | Pedal operated dry Fichtel & Sachs single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 3.7 gpm · 14.0 L/min | 5.2 gpm · 19.5 L/min | +39% D-219 |
| Rear PTO speeds declared | 1260 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,020 lb · 1,370 kg | 2,802 lb · 1,271 kg | +8% C 220 |
| Maximum permissible mass declared | 3,638–4,409 lb · 1,650–2,000 kg | 4,299 lb · 1,950 kg | differs |
| Wheelbase declared | 77.2 in · 1,960 mm | 68.1 in · 1,730 mm | +13% C 220 |
| Length declared | 122.0 in · 3,100 mm | 105.2 in · 2,672 mm | +16% C 220 |
| Width declared | 63.0–73.2 in · 1,600–1,860 mm | 62.2 in · 1,581 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 13.9 in · 354 mm | +13% C 220 |
| Turning radius, braked declared | 8.9 ft · 2.70 m | 8.0 ft · 2.45 m | +10% C 220 |
| Fuel tank declared | 47.6 qt · 45 L | 28.5 qt · 27.0 L | +67% C 220 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag C 220 sources
Source
- Source: Traktorenlexikon, “Hanomag C 220”
- Source: Traktorenlexikon, “Hanomag C 218”
International Harvester D-219 sources
Source
- Source: Traktorenlexikon, “McCormick D-219”
- Source: Traktorenlexikon, “McCormick D-217 Farmall”