Güldner G 40 W vs John Deere 920
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 40 W and the 920 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | G 40 W | 920 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 36.5 hp | — |
| Engine declared | Güldner 3 L 79 | John Deere M 4 FL 9 or 3.152 DL-02 | differs |
| Displacement declared | 2.36 L | 2.49 L | +6% 920 |
| Maximum torque declared | 95 lb·ft · 128 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.1 mph · 19.4 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | — | Pedal operated dry Fichtel & Sachs single disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.1 gpm · 23 L/min | 6.9 gpm · 26 L/min | +13% 920 |
| Three-point lift at ends declared | — | 2,745 lb · 1,245 kg | — |
| Rear PTO speeds declared | 540/1150 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,693 lb · 1,675 kg | 4,740 lb · 2,150 kg | +28% 920 |
| Maximum permissible mass declared | — | 7,055 lb · 3,200 kg | — |
| Wheelbase declared | 76.9 in · 1,954 mm | 74.4 in · 1,890 mm | — |
| Length declared | 111.8 in · 2,840 mm | 134.8 in · 3,425 mm | +21% 920 |
| Width declared | 43.5 in · 1,106 mm | 59.1 in · 1,500 mm | +36% 920 |
| Height declared | 51.2 in · 1,300 mm | 59.6 in · 1,515 mm | +17% 920 |
| Ground clearance declared | 13.4 in · 340 mm | 15.7 in · 400 mm | +18% 920 |
| Turning radius, braked declared | — | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 52.8 qt · 50 L | 66.0 qt · 62.5 L | +25% 920 |
Güldner G 40 W sources
Source
- Source: Traktorenlexikon, “Güldner G 40W”
- Source: Traktorenlexikon, “Güldner G 40 Toledo”
John Deere 920 sources
Source
- Source: Traktorenlexikon, “John Deere 920”