Güldner G 40 (Toledo) vs RÖHR R 35

9 material differences · fewer than 12

Tractor one

1962

No measured PTO figure

Tractor two

1949

No measured PTO figure

Which should you choose?

Read our verdict on the G 40 (Toledo) and the R 35 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Güldner G 40 (Toledo) and RÖHR R 35, field by field
Field	G 40 (Toledo)	R 35	Gap
Engine
Engine power, claimed claimed	35.34 hp	35.5 hp	—
Engine declared	Güldner 3 L 79	MWM KD 215 D	differs
Displacement declared	2.36 L	3.53 L	+50% R 35
Maximum torque declared	95 lb·ft · 128 N·m	—	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	12.4 mph · 20 km/h	differs
Clutch declared	Foot-operated dry double clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Pump flow declared	4.2 gpm · 16.0 L/min	—	—
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	3,748 lb · 1,700 kg	—	—
Rear PTO speeds declared	540/1150 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,442 lb · 2,015 kg	4,167 lb · 1,890 kg	+7% G 40 (Toledo)
Maximum permissible mass declared	4,526 lb · 2,053 kg	—	—
Wheelbase declared	76.9 in · 1,954 mm	76.4 in · 1,940 mm	—
Length declared	120.9 in · 3,070 mm	122.8 in · 3,120 mm	—
Width declared	61.9 in · 1,572 mm	61.0 in · 1,550 mm	—
Height declared	58.5 in · 1,485 mm	66.9 in · 1,700 mm	+14% R 35
Ground clearance declared	15.7 in · 400 mm	13.8 in · 350 mm	+14% G 40 (Toledo)
Turning radius, braked declared	9.8 ft · 3.00 m	9.8 ft · 3.00 m	—
Fuel tank declared	50.7 qt · 48 L	31.7 qt · 30.0 L	+60% G 40 (Toledo)

Source

Source