Güldner G 35 (S) vs UTB U-360

9 material differences · fewer than 12

Tractor one

1967–1969

No measured PTO figure

Tractor two

1977–1991

No measured PTO figure

Which should you choose?

Read our verdict on the G 35 (S) and the U-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Güldner G 35 (S) and UTB U-360, field by field
Field	G 35 (S)	U-360	Gap
Engine
Engine power, claimed claimed	34.3 hp	34.5 hp	—
Engine declared	Güldner 3 L 79	UTB D-115.000	differs
Displacement declared	2.36 L	2.40 L	—
Maximum torque declared	95 lb·ft · 128 N·m	97 lb·ft · 132 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	14.3 mph · 23 km/h	+15% U-360
Clutch declared	Pedal-operated dry double clutch by Fichtel & Sachs	—	—
Hydraulics & hitch
Pump flow declared	—	5.8 gpm · 21.8 L/min	—
Pressure declared	2,134 psi · 147 bar	—	—
Three-point lift at ends declared	3,417 lb · 1,550 kg	2,646 lb · 1,200 kg	+29% G 35 (S)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,178 lb · 1,895 kg	3,799 lb · 1,723 kg	+10% G 35 (S)
Maximum permissible mass declared	7,055 lb · 3,200 kg	—	—
Wheelbase declared	76.9 in · 1,954 mm	75.5 in · 1,918 mm	—
Length declared	128.0 in · 3,250 mm	113.0 in · 2,870 mm	+13% G 35 (S)
Width declared	65.4 in · 1,662 mm	65.9 in · 1,674 mm	—
Height declared	59.4 in · 1,510 mm	55.2 in · 1,403 mm	+8% G 35 (S)
Ground clearance declared	15.7 in · 400 mm	18.0 in · 457 mm	+14% U-360
Turning radius, braked declared	10.3 ft · 3.15 m	9.7 ft · 2.95 m	+7% G 35 (S)
Fuel tank declared	—	56.0 qt · 53.0 L	—

Source

Source