Güldner G 35 (S) vs International Harvester FU-267 D

10 material differences · fewer than 12

Tractor one

1967–1969

No measured PTO figure

Tractor two

1961

No measured PTO figure

Which should you choose?

Read our verdict on the G 35 (S) and the FU-267 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Güldner G 35 (S) and International Harvester FU-267 D, field by field
Field	G 35 (S)	FU-267 D	Gap
Engine
Engine power, claimed claimed	34.3 hp	34.5 hp	—
Engine declared	Güldner 3 L 79	INTERNATIONAL HARVESTER FD-136 M	differs
Displacement declared	2.36 L	2.23 L	+6% G 35 (S)
Maximum torque declared	95 lb·ft · 128 N·m	100 lb·ft · 135 N·m	+5% FU-267 D
Transmission
Top speed declared	12.4 mph · 20 km/h	11.8 mph · 19 km/h	+5% G 35 (S)
Clutch declared	Pedal-operated dry double clutch by Fichtel & Sachs	—	—
Hydraulics & hitch
Pump flow declared	—	4.9 gpm · 18.6 L/min	—
Pressure declared	2,134 psi · 147 bar	—	—
Three-point lift at ends declared	3,417 lb · 1,550 kg	—	—
Rear PTO speeds declared	540/1000 rpm	549 rpm	differs
Weight & dimensions
Unladen weight declared	4,178 lb · 1,895 kg	4,012 lb · 1,820 kg	—
Maximum permissible mass declared	7,055 lb · 3,200 kg	—	—
Wheelbase declared	76.9 in · 1,954 mm	70.1 in · 1,780 mm	+10% G 35 (S)
Length declared	128.0 in · 3,250 mm	122.0 in · 3,100 mm	—
Width declared	65.4 in · 1,662 mm	81.9 in · 2,080 mm	+25% FU-267 D
Height declared	59.4 in · 1,510 mm	66.9 in · 1,700 mm	+13% FU-267 D
Ground clearance declared	15.7 in · 400 mm	13.8 in · 350 mm	+14% G 35 (S)
Turning radius, braked declared	10.3 ft · 3.15 m	8.6 ft · 2.62 m	+20% G 35 (S)
Fuel tank declared	—	45.4 qt · 43.0 L	—

Source

Source