10 material differences · fewer than 12
Tractor oneFord 9761988–1993No measured PTO figureTractor twoNew Holland TJ-3752001–2005No measured PTO figure
Which should you choose?
Read our verdict on the 976 and the TJ-375 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 976 | TJ-375 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 360.1 hp | 369.9 hp | — |
| Engine declared | CUMMINS NTA 855-A 360 | CUMMINS QSX-15 | differs |
| Displacement declared | 14.02 L | 14.95 L | +7% TJ-375 |
| Maximum torque declared | 1,171 lb·ft · 1,588 N·m | 1,325 lb·ft · 1,797 N·m | +13% TJ-375 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 21.7 mph · 35 km/h | +40% TJ-375 |
| Clutch declared | Pedal-operated dry single-plate clutch | Pedal operated electrohydraulic wet Fuji-Univance multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 24.5 gpm · 92.7 L/min | 40.9 gpm · 154.8 L/min | +67% TJ-375 |
| Pressure declared | — | 2,596–2,698 psi · 179–186 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 36,046 lb · 16,350 kg | 37,620 lb · 17,064 kg | — |
| Maximum permissible mass declared | — | 39,683 lb · 18,000 kg | — |
| Wheelbase declared | 130.0 in · 3,302 mm | 154.0 in · 3,911 mm | +18% TJ-375 |
| Length declared | 260.0 in · 6,604 mm | 297.6 in · 7,558 mm | +14% TJ-375 |
| Width declared | 124.0 in · 3,150 mm | 145.0 in · 3,683 mm | +17% TJ-375 |
| Ground clearance declared | 16.1 in · 410 mm | 13.1 in · 334 mm | +23% 976 |
| Fuel tank declared | 1,146.5 qt · 1,085.0 L | 1,200.4 qt · 1,136.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 976 sources
- Source: Traktorenlexikon, “Ford Ford 976”
New Holland TJ-375 sources
- Source: Traktorenlexikon, “New Holland TJ375”