Ford 9600 (A) vs VALMET 2005-4

10 material differences · fewer than 12

Tractor one

1972–1976

No measured PTO figure

Tractor two

1986–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 9600 (A) and the 2005-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Ford 9600 (A) and VALMET 2005-4, field by field
Field	9600 (A)	2005-4	Gap
Engine
Engine power, claimed claimed	136.1 hp	138 hp	—
Engine declared	Ford 401 DFT	VOLVO TD 60 B	differs
Displacement declared	6.58 L	5.48 L	+20% 9600 (A)
Maximum torque declared	358 lb·ft · 485 N·m	365 lb·ft · 495 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated dry Automotive single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.0 gpm · 60.6 L/min	16.5 gpm · 62.6 L/min	—
Pressure declared	—	1,813 psi · 125 bar	—
Three-point lift at ends declared	7,055 lb · 3,200 kg	10,406 lb · 4,720 kg	+48% 2005-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,823 lb · 6,270 kg	13,966 lb · 6,335 kg	—
Wheelbase declared	91.5 in · 2,324 mm	112.0 in · 2,845 mm	+22% 2005-4
Length declared	151.0 in · 3,835 mm	185.8 in · 4,720 mm	+23% 2005-4
Width declared	91.1 in · 2,314 mm	96.1 in · 2,440 mm	+5% 2005-4
Height declared	117.0 in · 2,972 mm	122.0 in · 3,100 mm	—
Ground clearance declared	27.0 in · 685 mm	—	—
Turning radius, braked declared	11.0 ft · 3.35 m	15.6 ft · 4.76 m	+42% 2005-4
Fuel tank declared	172.2 qt · 163.0 L	221.9 qt · 210.0 L	+29% 2005-4

Source

Source