Ford 9600 (A) vs J.I. Case 2290

13 material differences

Tractor one

1972–1976

No measured PTO figure

Tractor two

1978–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 9600 (A) and the 2290 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 9600 (A) and J.I. Case 2290, field by field
Field	9600 (A)	2290	Gap
Engine
Engine power, claimed claimed	136.1 hp	147.9 hp	+9% 2290
Engine declared	Ford 401 DFT	CASE 504 BDT	differs
Displacement declared	6.58 L	8.26 L	+26% 2290
Maximum torque declared	358 lb·ft · 485 N·m	451 lb·ft · 611 N·m	+26% 2290
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5–18.6 mph · 25–30 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch	Pedal operated wet disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.0 gpm · 60.6 L/min	21.0 gpm · 79.5 L/min	+31% 2290
Three-point lift at ends declared	7,055 lb · 3,200 kg	9,921 lb · 4,500 kg	+41% 2290
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,823 lb · 6,270 kg	12,769–13,700 lb · 5,792–6,214 kg	differs
Wheelbase declared	91.5 in · 2,324 mm	104.0 in · 2,642 mm	+14% 2290
Length declared	151.0 in · 3,835 mm	175.5 in · 4,458 mm	+16% 2290
Width declared	91.1 in · 2,314 mm	96.0 in · 2,438 mm	+5% 2290
Height declared	117.0 in · 2,972 mm	115.0 in · 2,921 mm	—
Ground clearance declared	27.0 in · 685 mm	16.0 in · 406 mm	+69% 9600 (A)
Turning radius, braked declared	11.0 ft · 3.35 m	12.1 ft · 3.68 m	+10% 2290
Fuel tank declared	172.2 qt · 163.0 L	259.9 qt · 246.0 L	+51% 2290

Source

Source