Ford 7400 vs International Harvester 1055
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 7400 and the 1055 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 7400 | 1055 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 99 hp | — |
| Engine declared | Ford 2714 E | IH D-358 | differs |
| Displacement declared | 6.22 L | 5.87 L | +6% 7400 |
| Maximum torque declared | 273 lb·ft · 370 N·m | 281 lb·ft · 381 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal operated dry single plate clutch | Dry double clutch by Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 10.5 gpm · 39.9 L/min | +76% 1055 |
| Pressure declared | — | 2,466 psi · 170 bar | — |
| Three-point lift at ends declared | — | 9,535 lb · 4,325 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,267 lb · 3,750 kg | 9,458 lb · 4,290 kg | +14% 1055 |
| Wheelbase declared | 99.6 in · 2,530 mm | 103.4 in · 2,626 mm | — |
| Length declared | 153.5 in · 3,900 mm | 165.1 in · 4,194 mm | +8% 1055 |
| Width declared | 76.8 in · 1,950 mm | 80.7 in · 2,049 mm | — |
| Height declared | 94.5 in · 2,400 mm | 104.3 in · 2,649 mm | +10% 1055 |
| Ground clearance declared | — | 20.3 in · 516 mm | — |
| Turning radius, braked declared | 14.6 ft · 4.45 m | 14.4 ft · 4.40 m | — |
| Fuel tank declared | — | 147.9 qt · 140 L | — |
Ford 7400 sources
Source
- Source: Traktorenlexikon, “Ford 7400”
- Source: Traktorenlexikon, “Ford 8100”
International Harvester 1055 sources
Source
- Source: Traktorenlexikon, “IHC 1055”
- Source: Traktorenlexikon, “IHC 1055 XL”