Ford 6000 vs John Deere 3010
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6000 and the 3010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 6000 | 3010 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.5 hp | 64.1 hp | — |
| Maximum torque declared | — | 171 lb·ft · 231 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.5 gpm · 17.0 L/min | 18.0 gpm · 68.0 L/min | +300% 3010 |
| Pressure declared | — | 2,247 psi · 155 bar | — |
| Three-point lift at ends declared | — | 3,968 lb · 1,800 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,225 lb · 3,277 kg | 6,967 lb · 3,160 kg | — |
| Wheelbase declared | 85.0 in · 2,159 mm | 81.5 in · 2,070 mm | — |
| Length declared | 150.0 in · 3,810 mm | 147.6 in · 3,750 mm | — |
| Width declared | 73.0 in · 1,854 mm | 83.7 in · 2,125 mm | +15% 3010 |
| Height declared | 70.0 in · 1,778 mm | 76.8 in · 1,950 mm | +10% 3010 |
| Ground clearance declared | 19.5 in · 495 mm | 19.3 in · 490 mm | — |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 10.7 ft · 3.25 m | +12% 3010 |
| Fuel tank declared | 124.7 qt · 118.0 L | 116.2 qt · 110.0 L | +7% 6000 |
Ford 6000 sources
Source
- Source: Traktorenlexikon, “Ford 6000”
John Deere 3010 sources
Source
- Source: Traktorenlexikon, “John Deere 3010”