Ford 4630 (A) vs Hürlimann H-361 (A)
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4630 (A) and the H-361 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 4630 (A) | H-361 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.2 hp | 59.1 hp | — |
| Engine declared | Ford D 201 CID-NA | Hürlimann 1.053 P | differs |
| Displacement declared | 3.29 L | 3.12 L | +6% 4630 (A) |
| Maximum torque declared | 162 lb·ft · 220 N·m | 144 lb·ft · 195 N·m | +13% 4630 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated dry AP single-disc clutch | pedal operated dry SLH single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 7.8 gpm · 29.5 L/min | — | — |
| Pressure declared | 2,857 psi · 197 bar | 1,740 psi · 120 bar | +64% 4630 (A) |
| Three-point lift at ends declared | 4,381 lb · 1,987 kg | 5,789 lb · 2,626 kg | +32% H-361 (A) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,151 lb · 2,790 kg | 5,346 lb · 2,425 kg | +15% 4630 (A) |
| Wheelbase declared | 84.5 in · 2,146 mm | 82.1 in · 2,085 mm | — |
| Length declared | 138.6 in · 3,521 mm | 135.4 in · 3,440 mm | — |
| Width declared | 68.3 in · 1,735 mm | 69.3 in · 1,760 mm | — |
| Height declared | 97.8 in · 2,485 mm | 93.5 in · 2,375 mm | — |
| Ground clearance declared | 14.8 in · 375 mm | 13.2 in · 335 mm | +12% 4630 (A) |
| Fuel tank declared | 69.4 qt · 65.7 L | 58.1 qt · 55.0 L | +19% 4630 (A) |
Ford 4630 (A) sources
Source
- Source: Traktorenlexikon, “Ford 4630”
Hürlimann H-361 (A) sources
Source
- Source: Traktorenlexikon, “Hürlimann H 361”