Ford 4630 (A) or Hürlimann H-361 (A)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Hürlimann H-361 (A) is ahead on PTO speeds.

  • The Hürlimann H-361 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Ford 4630 (A) and Hürlimann H-361 (A), with the call on each
Question4630 (A)H-361 (A)Call
Which puts more power through the PTO shaft?37.3 kW (50.0 hp)Traktorenlexikon, “Ford 4630”37.2 kW (49.9 hp)Traktorenlexikon, “Hürlimann H 361”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 4630 (A) and the H-361 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 4630 (A) and the H-361 (A).
Which pumps more oil for implements?29.5 L/min (7.8 gpm)Traktorenlexikon, “Ford 4630”No figureNo call on hydraulic flow: no figure on record for the H-361 (A).
Which lifts more on the three-point hitch?1,987 kg (4,381 lb)Traktorenlexikon, “Ford 4630”2,626 kg (5,789 lb)Traktorenlexikon, “Hürlimann H 361”Not comparableNot comparable on three-point lift: the 4630 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 4630”); the H-361 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 361”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,790 kg (6,151 lb)Traktorenlexikon, “Ford 4630”2,425 kg (5,346 lb)Traktorenlexikon, “Hürlimann H 361”Ahead (a fact, not an advantage)The Ford 4630 (A) is 15% heavier (365 kg / 805 lb) than the Hürlimann H-361 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 4630 (A) and the H-361 (A).
Which has the wider choice of gears?8 to 16Traktorenlexikon, “Ford 4630”12 to 16Traktorenlexikon, “Hürlimann H 361”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 4630 (A) and the H-361 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Ford 4630”30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 361”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Ford 4630”540/1000 rpmTraktorenlexikon, “Hürlimann H 361”AheadThe Hürlimann H-361 (A) offers 1000 rpm at the PTO, which the Ford 4630 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford 4630”No figureNo call on PTO independence: not stated for the H-361 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Ford 4630”2WD / 4WDTraktorenlexikon, “Hürlimann H 361”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1990–19991986–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 4630 (A) is 15% heavier (365 kg / 805 lb) than the Hürlimann H-361 (A) (both unladen weight, as stated by the source).
  • The Hürlimann H-361 (A) offers 1000 rpm at the PTO, which the Ford 4630 (A) does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on three-point lift: the 4630 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 4630”); the H-361 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 361”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources