Ford 3930 (A) vs Landini 5830 (DT) TL-22 N/G (TL-DT/L)

9 material differences · fewer than 12

Tractor one

1990–1999

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 3930 (A) and the 5830 (DT) TL-22 N/G (TL-DT/L) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Ford 3930 (A) and Landini 5830 (DT) TL-22 N/G (TL-DT/L), field by field
Field	3930 (A)	5830 (DT) TL-22 N/G (TL-DT/L)	Gap
Engine
Engine power, claimed claimed	50.3 hp	49.3 hp	—
Engine declared	Ford C 201 CID-NA	Perkins AD 3.152 S	differs
Displacement declared	3.29 L	2.50 L	+32% 3930 (A)
Maximum torque declared	137 lb·ft · 186 N·m	133 lb·ft · 181 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry AP single-disc clutch	Dry, air-cooled OMG double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.8 gpm · 33.2 L/min	9.5 gpm · 36.1 L/min	+9% 5830 (DT) TL-22 N/G (TL-DT/L)
Pressure declared	1,378–1,450 psi · 95–100 bar	—	—
Three-point lift at ends declared	4,299 lb · 1,950 kg	4,519 lb · 2,050 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,045 lb · 2,742 kg	4,674 lb · 2,120 kg	+29% 3930 (A)
Wheelbase declared	84.5 in · 2,146 mm	81.9 in · 2,080 mm	—
Length declared	138.8 in · 3,525 mm	140.7 in · 3,575 mm	—
Width declared	69.7 in · 1,771 mm	69.1 in · 1,755 mm	—
Height declared	96.0 in · 2,438 mm	89.6 in · 2,275 mm	+7% 3930 (A)
Ground clearance declared	12.2 in · 310 mm	17.1 in · 435 mm	+40% 5830 (DT) TL-22 N/G (TL-DT/L)
Turning radius, braked declared	—	12.4 ft · 3.79 m	—
Fuel tank declared	69.4 qt · 65.7 L	63.9 qt · 60.5 L	+9% 3930 (A)

Source

Source