5 material differences · fewer than 12
Tractor oneFord 29101983–1991No measured PTO figureTractor twoLeyland 2451973–1975No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1983–1991; 1973–1975). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2910 | 245 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 40.5 hp | 46.8 hp | +16% 245 |
| Engine declared | — | Perkins D 3152 | — |
| Displacement declared | — | 2.50 L | — |
| Maximum torque declared | 122 lb·ft · 165 N·m | 128 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30.0 km/h | 16.2 mph · 26 km/h | +15% 2910 |
| Clutch declared | — | Dry Borg & Beck double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.7 gpm · 29.0 L/min | 8.0 gpm · 30.2 L/min | — |
| Pressure declared | 2,553 psi · 176 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,850 lb · 2,200 kg | 5,236 lb · 2,375 kg | +8% 245 |
| Wheelbase declared | 77.5 in · 1,969 mm | 74.4 in · 1,890 mm | — |
| Length declared | 134.6 in · 3,418 mm | 126.0 in · 3,200 mm | +7% 2910 |
| Width declared | 68.4 in · 1,737 mm | 63.8 in · 1,621 mm | +7% 2910 |
| Ground clearance declared | 12.5 in · 317 mm | 15.7 in · 399 mm | +26% 245 |
| Turning radius, braked declared | — | 10.1 ft · 3.07 m | — |
| Fuel tank declared | 52.1 qt · 49.3 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 2910 sources
- Source: Traktorenlexikon, “Ford 2910”
Leyland 245 sources
- Source: Traktorenlexikon, “Leyland 245”
- Source: Traktorenlexikon, “Lindner BF 420 SN/SA”