9 material differences · fewer than 12
Tractor oneFord 26101981–1983No measured PTO figureTractor twoHürlimann Prince 445 DT1995–1999No measured PTO figure
Which should you choose?
Read our verdict on the 2610 and the Prince 445 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 2610 | Prince 445 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 40.5 hp | 41.4 hp | — |
| Engine declared | — | MITSUBISHI K4 F-D Turbo | — |
| Displacement declared | — | 1.49 L | — |
| Maximum torque declared | 113 lb·ft · 153.5 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.0 mph · 29 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated, dry Borg & Beck double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 1.8 gpm · 7.0 L/min | +211% 2610 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,977 lb · 1,804 kg | 2,734 lb · 1,240 kg | +45% 2610 |
| Wheelbase declared | 75.8 in · 1,925 mm | 66.9 in · 1,700 mm | +13% 2610 |
| Length declared | 128.0 in · 3,250 mm | 119.3 in · 3,030 mm | +7% 2610 |
| Width declared | 64.6–88.6 in · 1,640–2,250 mm | 49.6–53.5 in · 1,260–1,360 mm | differs |
| Ground clearance declared | 9.7 in · 247 mm | 15.4 in · 390 mm | +58% Prince 445 DT |
| Turning radius, braked declared | 10.1 ft · 3.07 m | 10.8 ft · 3.30 m | +7% Prince 445 DT |
| Fuel tank declared | 52.0 qt · 49.2 L | 30.6 qt · 29.0 L | +70% 2610 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 2610 sources
- Source: Traktorenlexikon, “Ford 2610”
Hürlimann Prince 445 DT sources
- Source: Traktorenlexikon, “Hürlimann Prince 445”