Ford 1910 (A) vs Hürlimann Prince 435 DT

12 material differences

Tractor one

1983–1986

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 1910 (A) and the Prince 435 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Ford 1910 (A) and Hürlimann Prince 435 DT, field by field
Field	1910 (A)	Prince 435 DT	Gap
Engine
Engine power, claimed claimed	31.5 hp	34.6 hp	+10% Prince 435 DT
Engine declared	ISHIKAWAJIMA-SHIBAURA T-853 A	MITSUBISHI K4 F-D	differs
Displacement declared	1.70 L	1.49 L	+14% 1910 (A)
Maximum torque declared	71 lb·ft · 96.1 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	18.6 mph · 30 km/h	+50% Prince 435 DT
Clutch declared	Pedal-operated dry DAIKIN double clutch	Pedal-operated dry SDF single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.5 L/min	1.4 gpm · 5.3 L/min	+513% 1910 (A)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	3,816 lb · 1,731 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,040 lb · 1,379 kg	2,601 lb · 1,180 kg	+17% 1910 (A)
Wheelbase declared	66.3 in · 1,684 mm	64.2 in · 1,630 mm	—
Length declared	122.4 in · 3,110 mm	116.5 in · 2,960 mm	—
Width declared	57.5 in · 1,460 mm	40.2 in · 1,020 mm	+43% 1910 (A)
Height declared	86.6 in · 2,200 mm	78.7 in · 2,000 mm	+10% 1910 (A)
Ground clearance declared	13.4 in · 340 mm	14.2 in · 360 mm	+6% Prince 435 DT
Turning radius, braked declared	8.0 ft · 2.45 m	9.0 ft · 2.73 m	+11% Prince 435 DT
Fuel tank declared	36.8 qt · 34.8 L	30.6 qt · 29.0 L	+20% 1910 (A)

Source

Source