Fiat TS 100 (DT) vs John Deere 3050 (A)

12 material differences

Tractor one

1997–2003

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the TS 100 (DT) and the 3050 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TS 100 (DT) and John Deere 3050 (A), field by field
Field	TS 100 (DT)	3050 (A)	Gap
Engine
Engine power, claimed claimed	88.8 hp	90.8 hp	—
Engine declared	New Holland 450 T/PF	John Deere 6.359 DL-008	differs
Displacement declared	4.99 L	5.88 L	+18% 3050 (A)
Maximum torque declared	277 lb·ft · 375 N·m	251 lb·ft · 340 N·m	+10% TS 100 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	22.7 gpm · 86.0 L/min	13.8 gpm · 52.3 L/min	+64% TS 100 (DT)
Pressure declared	2,857 psi · 197 bar	3,336 psi · 230 bar	+17% 3050 (A)
Three-point lift at ends declared	9,467 lb · 4,294 kg	9,978 lb · 4,526 kg	+5% 3050 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,662 lb · 3,929 kg	8,642 lb · 3,920 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,771 lb · 6,700 kg	+12% 3050 (A)
Wheelbase declared	91.7 in · 2,330 mm	100.4 in · 2,551 mm	+9% 3050 (A)
Length declared	150.0 in · 3,810 mm	188.5 in · 4,787 mm	+26% 3050 (A)
Width declared	85.8 in · 2,180 mm	83.8 in · 2,129 mm	—
Height declared	108.7 in · 2,762 mm	116.7 in · 2,964 mm	+7% 3050 (A)
Ground clearance declared	17.7 in · 450 mm	25.6 in · 650 mm	+44% 3050 (A)
Turning radius, braked declared	10.8 ft · 3.30 m	—	—
Fuel tank declared	169.1 qt · 160.0 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source