Fiat TL 100 (DT) vs John Deere 2800 (A)

13 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the 2800 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and John Deere 2800 (A), field by field
Field	TL 100 (DT)	2800 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	ZETOR 1001	differs
Displacement declared	3.91 L	4.16 L	+6% 2800 (A)
Maximum torque declared	245 lb·ft · 332 N·m	277 lb·ft · 376 N·m	+13% 2800 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	—	Pedal-operated dry Zetor single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	11.3 gpm · 42.9 L/min	+40% TL 100 (DT)
Pressure declared	2,103 psi · 145 bar	2,350 psi · 162 bar	+12% 2800 (A)
Three-point lift at ends declared	8,554 lb · 3,880 kg	8,598 lb · 3,900 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	8,157 lb · 3,700 kg	+18% TL 100 (DT)
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% 2800 (A)
Wheelbase declared	92.2 in · 2,342 mm	93.5 in · 2,375 mm	—
Length declared	174.4 in · 4,430 mm	165.0 in · 4,190 mm	+6% TL 100 (DT)
Width declared	79.1 in · 2,009 mm	76.8 in · 1,950 mm	—
Height declared	100.4 in · 2,550 mm	104.1 in · 2,645 mm	—
Ground clearance declared	17.3 in · 440 mm	11.0 in · 279 mm	+58% TL 100 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	12.7 ft · 3.87 m	+6% 2800 (A)
Fuel tank declared	121.5 qt · 115.0 L	111.0 qt · 105.0 L	+10% TL 100 (DT)

Source

Source