12 material differences

Tractor oneFiat PRIMO 60-66 DT/Turbo1988–1992No measured PTO figureTractor twoJohn Deere 2550 (A)1983–1986No measured PTO figure

Which should you choose?

Read our verdict on the PRIMO 60-66 DT/Turbo and the 2550 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat PRIMO 60-66 DT/Turbo and John Deere 2550 (A), field by field
FieldPRIMO 60-66 DT/Turbo2550 (A)Gap
Engine
Engine power, claimed claimed65.2 hp65.2 hp—
Engine declaredFIAT-IVECO 8035.05 Turbo——
Displacement declared2.93 L——
Maximum torque declared147 lb·ft · 199 N·m——
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredDry Valeo or LuK double clutchpedal-operated dry single-disc clutch as driving clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Closed centre—
Pump flow declared8.7 gpm · 32.8 L/min13.0 gpm · 49.2 L/min+50% 2550 (A)
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,437 lb · 2,920 kg7,628 lb · 3,460 kg+18% 2550 (A)
Maximum permissible mass declared9,259 lb · 4,200 kg10,582 lb · 4,800 kg+14% 2550 (A)
Wheelbase declared84.6 in · 2,148 mm89.2 in · 2,266 mm+5% 2550 (A)
Length declared143.7 in · 3,650 mm133.1 in · 3,380 mm+8% PRIMO 60-66 DT/Turbo
Width declared75.2–92.5 in · 1,910–2,350 mm79.9 in · 2,029 mmdiffers
Ground clearance declared15.0 in · 380 mm24.4 in · 620 mm+63% 2550 (A)
Turning radius, braked declared13.5 ft · 4.10 m11.2 ft · 3.40 m+21% PRIMO 60-66 DT/Turbo
Fuel tank declared77.1 qt · 73.0 L95.9 qt · 90.8 L+24% 2550 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat PRIMO 60-66 DT/Turbo sources

Source
  • Source: Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”

John Deere 2550 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 2550”