Fiat 980 (DT) vs VALMET 755/755-4

11 material differences · fewer than 12

Tractor one

1979–1984

No measured PTO figure

Tractor two

1989–1991

No measured PTO figure

Which should you choose?

Read our verdict on the 980 (DT) and the 755/755-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 980 (DT) and VALMET 755/755-4, field by field
Field	980 (DT)	755/755-4	Gap
Engine
Engine power, claimed claimed	96.7 hp	88.8 hp	+9% 980 (DT)
Engine declared	FIAT-IVECO 8065.02.217	VALMET TD 44 D-7	differs
Displacement declared	5.18 L	4.40 L	+18% 980 (DT)
Maximum torque declared	237 lb·ft · 321 N·m	240 lb·ft · 325 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Foot-operated dry single-disc clutch combined with wet turbo clutch	—
Hydraulics & hitch
Pump flow declared	8.4 gpm · 31.8 L/min	—	—
Pressure declared	3,263 psi · 225 bar	3,191 psi · 220 bar	—
Three-point lift at ends declared	7,385 lb · 3,350 kg	9,921 lb · 4,500 kg	+34% 755/755-4
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,628 lb · 3,460 kg	8,289 lb · 3,760 kg	+9% 755/755-4
Wheelbase declared	101.2 in · 2,570 mm	93.9 in · 2,385 mm	+8% 980 (DT)
Length declared	152.2 in · 3,865 mm	177.8 in · 4,515 mm	+17% 755/755-4
Width declared	77.6 in · 1,970 mm	83.9 in · 2,130 mm	+8% 755/755-4
Height declared	104.1 in · 2,645 mm	105.1 in · 2,670 mm	—
Ground clearance declared	22.0 in · 560 mm	18.7 in · 475 mm	+18% 980 (DT)
Turning radius, braked declared	12.6 ft · 3.83 m	—	—
Fuel tank declared	161.7 qt · 153.0 L	190.2 qt · 180.0 L	+18% 755/755-4

Source

Source