Fiat 980 (DT) vs International Harvester 3088
12 material differences
Which should you choose?
Read our verdict on the 980 (DT) and the 3088 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 980 (DT) | 3088 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 96.7 hp | 80.9 hp | +20% 980 (DT) |
| Engine declared | FIAT-IVECO 8065.02.217 | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 5.18 L | 5.87 L | +13% 3088 |
| Maximum torque declared | 237 lb·ft · 321 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.8 L/min | 15.0 gpm · 56.8 L/min | +79% 3088 |
| Pressure declared | 3,263 psi · 225 bar | — | — |
| Three-point lift at ends declared | 7,385 lb · 3,350 kg | 6,704 lb · 3,041 kg | +10% 980 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 11,940 lb · 5,416 kg | +57% 3088 |
| Wheelbase declared | 101.2 in · 2,570 mm | 104.8 in · 2,662 mm | — |
| Length declared | 152.2 in · 3,865 mm | 184.0 in · 4,674 mm | +21% 3088 |
| Width declared | 77.6 in · 1,970 mm | 102.0 in · 2,591 mm | +32% 3088 |
| Height declared | 104.1 in · 2,645 mm | 112.0 in · 2,845 mm | +8% 3088 |
| Ground clearance declared | 22.0 in · 560 mm | 13.0 in · 330 mm | +70% 980 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.83 m | 11.9 ft · 3.63 m | +6% 980 (DT) |
| Fuel tank declared | 161.7 qt · 153.0 L | 200.0 qt · 189.3 L | +24% 3088 |
Fiat 980 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 980 DT”
International Harvester 3088 sources
Source
- Source: Traktorenlexikon, “IHC 3088”
- Source: Traktorenlexikon, “IHC 786”