Fiat 940 (DT) vs Hanomag Robust 901 A (S)

11 material differences · fewer than 12

Tractor one

1978–1979

No measured PTO figure

Tractor two

1969–1970

No measured PTO figure

Which should you choose?

Read our verdict on the 940 (DT) and the Robust 901 A (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 940 (DT) and Hanomag Robust 901 A (S), field by field
Field	940 (DT)	Robust 901 A (S)	Gap
Engine
Engine power, claimed claimed	90.8 hp	91 hp	—
Engine declared	O.M.-FIAT CO 3/80	Hanomag D162 R2	differs
Displacement declared	4.94 L	4.71 L	—
Maximum torque declared	—	207 lb·ft · 281 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.3–16.9 mph · 19.87–27.15 km/h	differs
Clutch declared	Dry FEREDO double clutch	Double clutch for transmission and PTO	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	8.5 gpm · 32 L/min	+19% 940 (DT)
Pressure declared	2,901 psi · 200 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	8,223–8,885 lb · 3,730–4,030 kg	differs
Wheelbase declared	93.3 in · 2,370 mm	97.4–98.8 in · 2,475–2,510 mm	differs
Length declared	159.4 in · 4,050 mm	157.1 in · 3,990 mm	—
Width declared	76.2 in · 1,935 mm	79.3–84.6 in · 2,015–2,150 mm	differs
Height declared	105.1 in · 2,670 mm	75.2 in · 1,910 mm	+40% 940 (DT)
Ground clearance declared	22.4 in · 570 mm	12.6 in · 320 mm	+78% 940 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	13.5 ft · 4.10 m	+7% Robust 901 A (S)
Fuel tank declared	95.1 qt · 90.0 L	132.1 qt · 125 L	+39% Robust 901 A (S)

Source

Source