10 material differences · fewer than 12
Tractor oneFiat 615 (DT)1965–1968No measured PTO figureTractor twoJohn Deere 30101962–1964No measured PTO figure
Which should you choose?
Read our verdict on the 615 (DT) and the 3010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 615 (DT) | 3010 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | O.M.-FIAT CO 2 D/60 Var.10 or Var.12 | — | — |
| Displacement declared | 4.40 L | — | — |
| Maximum torque declared | 188 lb·ft · 255 N·m | 171 lb·ft · 231 N·m | +10% 615 (DT) |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 18.6 mph · 30 km/h | +25% 3010 |
| Clutch declared | pedal operated two stage dry FERODO double clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | 18.0 gpm · 68.0 L/min | +157% 3010 |
| Pressure declared | 2,988 psi · 206 bar | 2,247 psi · 155 bar | +33% 615 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 6,967 lb · 3,160 kg | +16% 3010 |
| Wheelbase declared | 85.4 in · 2,170 mm | 81.5 in · 2,070 mm | — |
| Length declared | 140.9 in · 3,580 mm | 147.6 in · 3,750 mm | — |
| Width declared | 71.7–98.0 in · 1,820–2,490 mm | 83.7 in · 2,125 mm | differs |
| Height, over the steering wheel declared | 66.5 in · 1,690 mm | 76.8 in · 1,950 mm | +15% 3010 |
| Ground clearance declared | 18.5 in · 470 mm | 19.3 in · 490 mm | — |
| Turning radius, braked declared | 12.0 ft · 3.65 m | 10.7 ft · 3.25 m | +12% 615 (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 116.2 qt · 110.0 L | +31% 3010 |
Fiat 615 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 615/615 DT”
John Deere 3010 sources
Source
- Source: Traktorenlexikon, “John Deere 3010”