Fiat 55-66 (DT) vs Massey Ferguson MF 362/II

10 material differences · fewer than 12

Tractor one

1985–1992

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 55-66 (DT) and the MF 362/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 55-66 (DT) and Massey Ferguson MF 362/II, field by field
Field	55-66 (DT)	MF 362/II	Gap
Engine
Engine power, claimed claimed	54.3 hp	61.2 hp	+13% MF 362/II
Engine declared	FIAT-IVECO 8035.06.206 or 306	Perkins A 4.236	differs
Displacement declared	2.71 L	3.87 L	+43% MF 362/II
Maximum torque declared	128 lb·ft · 174 N·m	168 lb·ft · 228 N·m	+31% MF 362/II
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Pump flow declared	—	9.5 gpm · 36.0 L/min	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	—	6,373 lb · 2,891 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	4,971 lb · 2,255 kg	6,063 lb · 2,750 kg	+22% MF 362/II
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	85.6 in · 2,175 mm	85.8 in · 2,180 mm	—
Length declared	125.4 in · 3,185 mm	153.9 in · 3,910 mm	+23% MF 362/II
Width declared	75.2 in · 1,910 mm	79.9 in · 2,030 mm	+6% MF 362/II
Height declared	90.7 in · 2,305 mm	97.6 in · 2,480 mm	+8% MF 362/II
Ground clearance declared	19.5 in · 495 mm	15.7 in · 400 mm	+24% 55-66 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	79.3 qt · 75.0 L	—

Source

Source