7 material differences · fewer than 12
Tractor oneFiat 50-R1958–1959No measured PTO figureTractor twoJohn Deere-LANZ 7001963–1965No measured PTO figure
Which should you choose?
Read our verdict on the 50-R and the 700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 50-R | 700 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | O.M.-FIAT CO 1D-50/Var. 10 | John Deere 405 | differs |
| Displacement declared | 4.16 L | 2.71 L | +54% 50-R |
| Maximum torque declared | 177 lb·ft · 240 N·m | 125 lb·ft · 170 N·m | +41% 50-R |
| Transmission | |||
| Top speed declared | 14.3 mph · 23 km/h | 12.4–18.6 mph · 20–30 km/h | differs |
| Clutch declared | pedal-operated dry single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 5,071 lb · 2,300 kg | — |
| Maximum permissible mass declared | — | 7,716 lb · 3,500 kg | — |
| Wheelbase declared | 74.8 in · 1,900 mm | 76.8 in · 1,950 mm | — |
| Length declared | 125.2 in · 3,180 mm | 133.5 in · 3,390 mm | +7% 700 |
| Width declared | 60.4–91.9 in · 1,535–2,335 mm | 65.0 in · 1,650 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 15.2 in · 385 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | — | — |
| Fuel tank declared | 53.9 qt · 51.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 50-R sources
Source
- Source: Traktorenlexikon, “Fiat 50 R”
John Deere-LANZ 700 sources
Source
- Source: Traktorenlexikon, “John Deere-Lanz 700”