Fiat 45-66 V (DT/V) vs Ford 3430
13 material differences
Which should you choose?
Read our verdict on the 45-66 V (DT/V) and the 3430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 45-66 V (DT/V) | 3430 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | — | — |
| Engine declared | FIAT-IVECO 8035.06.220 or 320 | Ford B 192 | differs |
| Displacement declared | 2.71 L | 3.14 L | +16% 3430 |
| Maximum torque declared | 107 lb·ft · 144.6 N·m | 125 lb·ft · 170 N·m | +18% 3430 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry Valeo or LuK double clutch | Pedal-operated dry AP single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | — | 8.2 gpm · 31.0 L/min | — |
| Pressure declared | — | 1,378–1,450 psi · 95–100 bar | — |
| Three-point lift at ends declared | 3,968 lb · 1,800 kg | 3,748 lb · 1,700 kg | +6% 45-66 V (DT/V) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 6,045 lb · 2,742 kg | +79% 3430 |
| Wheelbase declared | 72.6 in · 1,845 mm | 84.5 in · 2,146 mm | +16% 3430 |
| Length declared | 113.6 in · 2,885 mm | 138.8 in · 3,525 mm | +22% 3430 |
| Width declared | 53.5 in · 1,360 mm | 69.7 in · 1,771 mm | +30% 3430 |
| Height declared | 81.1 in · 2,060 mm | 96.5 in · 2,451 mm | +19% 3430 |
| Ground clearance declared | 12.8 in · 325 mm | 11.8 in · 300 mm | +8% 45-66 V (DT/V) |
| Fuel tank declared | 52.8 qt · 50.0 L | 69.4 qt · 65.7 L | +31% 3430 |
Fiat 45-66 V (DT/V) sources
Source
- Source: Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”
Ford 3430 sources
Source
- Source: Traktorenlexikon, “Ford 3430”