10 material differences · fewer than 12
Tractor oneFiat 415 (DT)1963–1968No measured PTO figureTractor twoZETOR 40111962–1967No measured PTO figure
Which should you choose?
Read our verdict on the 415 (DT) and the 4011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 415 (DT) | 4011 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT 615.000 | ZETOR Z-4001 | differs |
| Displacement declared | 2.27 L | 3.12 L | +37% 4011 |
| Maximum torque declared | 101 lb·ft · 137 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated dry two-stage double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.8 gpm · 18.0 L/min | 6.1 gpm · 23.0 L/min | +28% 4011 |
| Pressure declared | 2,843 psi · 196 bar | 1,707 psi · 118 bar | +66% 415 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,505 lb · 1,590 kg | 4,332 lb · 1,965 kg | +24% 4011 |
| Wheelbase declared | 75.8 in · 1,925 mm | 83.7 in · 2,125 mm | +10% 4011 |
| Length declared | 119.7 in · 3,040 mm | 128.0 in · 3,250 mm | +7% 4011 |
| Width declared | 64.0–90.6 in · 1,625–2,300 mm | 70.5 in · 1,790 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 17.2 in · 436 mm | +10% 415 (DT) |
| Turning radius, braked declared | 10.4 ft · 3.18 m | 10.7 ft · 3.25 m | — |
| Fuel tank declared | 51.8 qt · 49.0 L | 84.5 qt · 80.0 L | +63% 4011 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 415 (DT) sources
- Source: Traktorenlexikon, “Fiat 415/415 DT”
ZETOR 4011 sources
- Source: Traktorenlexikon, “Zetor 4011”
- Source: Traktorenlexikon, “Zetor 4511”