Fiat 415 (DT) vs VALMET 565

10 material differences · fewer than 12

Tractor one

1963–1968

No measured PTO figure

Tractor two

1964–1968

No measured PTO figure

Which should you choose?

Read our verdict on the 415 (DT) and the 565 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 415 (DT) and VALMET 565, field by field
Field	415 (DT)	565	Gap
Engine
Engine power, claimed claimed	44.4 hp	45.3 hp	—
Engine declared	FIAT 615.000	VALMET 310 A or 310 B	differs
Displacement declared	2.27 L	2.69 L	+18% 565
Maximum torque declared	101 lb·ft · 137 N·m	127 lb·ft · 172 N·m	+26% 565
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 565
Clutch declared	—	Pedal-operated dry Borg & Beck single-plate clutch	—
Hydraulics & hitch
Pump flow declared	4.8 gpm · 18.0 L/min	6.4 gpm · 24.1 L/min	+34% 565
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	—	2,976 lb · 1,350 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,505 lb · 1,590 kg	4,259 lb · 1,932 kg	+22% 565
Wheelbase declared	75.8 in · 1,925 mm	74.6 in · 1,895 mm	—
Length declared	119.7 in · 3,040 mm	122.4 in · 3,110 mm	—
Width declared	64.0 in · 1,625 mm	70.1 in · 1,780 mm	+10% 565
Height declared	73.6 in · 1,870 mm	87.4 in · 2,220 mm	+19% 565
Ground clearance declared	18.9 in · 480 mm	18.9 in · 480 mm	—
Turning radius, braked declared	10.4 ft · 3.18 m	9.8 ft · 2.98 m	+7% 415 (DT)
Fuel tank declared	51.8 qt · 49.0 L	40.2 qt · 38.0 L	+29% 415 (DT)

Source

Source