1 material differences · fewer than 12
Tractor oneFiat 415 (DT)1963–1968No measured PTO figureTractor twoSOMECA 415 (DT)1965–1968No measured PTO figure
Which should you choose?
Read our verdict on the 415 (DT) and the 415 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 15 fields identical or within 5%, which is not counted as material
| Field | 415 (DT) | 415 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT 615.000 | O.M.-FIAT 615.000 | differs |
| Displacement declared | 2.27 L | 2.27 L | — |
| Maximum torque declared | 101 lb·ft · 137 N·m | 101 lb·ft · 137 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.8 gpm · 18.0 L/min | 4.8 gpm · 18.0 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,505 lb · 1,590 kg | 3,505 lb · 1,590 kg | — |
| Wheelbase declared | 75.8 in · 1,925 mm | 75.8 in · 1,925 mm | — |
| Length declared | 119.7 in · 3,040 mm | 119.7 in · 3,040 mm | — |
| Width declared | 64.0–90.6 in · 1,625–2,300 mm | 64.0–90.6 in · 1,625–2,300 mm | — |
| Height, over the exhaust declared | 73.6 in · 1,870 mm | 73.6 in · 1,870 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 18.9 in · 480 mm | — |
| Turning radius, braked declared | 10.4 ft · 3.18 m | 10.4 ft · 3.18 m | — |
| Fuel tank declared | 51.8 qt · 49.0 L | 51.8 qt · 49.0 L | — |
Fiat 415 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 415/415 DT”
SOMECA 415 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 415”
- Source: Traktorenlexikon, “Someca SOM 35”