Fiat 400 (DT) vs UTB U-360
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 400 (DT) and the U-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 400 (DT) | U-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.5 hp | 34.5 hp | — |
| Engine declared | FIAT-IVECO 8035.01.201 | UTB D-115.000 | differs |
| Displacement declared | 2.34 L | 2.40 L | — |
| Maximum torque declared | 103 lb·ft · 140 N·m | 97 lb·ft · 132 N·m | +6% 400 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.3 mph · 23 km/h | +9% 400 (DT) |
| Clutch declared | Pedal-operated two-stage dry Feredo double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift at ends declared | 2,866 lb · 1,300 kg | 2,646 lb · 1,200 kg | +8% 400 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,750 lb · 1,701 kg | 3,799 lb · 1,723 kg | — |
| Wheelbase declared | 75.6 in · 1,920 mm | 75.5 in · 1,918 mm | — |
| Length declared | 124.8 in · 3,169 mm | 113.0 in · 2,870 mm | +10% 400 (DT) |
| Width declared | 62.4 in · 1,585 mm | 65.9 in · 1,674 mm | +6% U-360 |
| Height declared | 67.5 in · 1,715 mm | 55.2 in · 1,403 mm | +22% 400 (DT) |
| Ground clearance declared | 14.6 in · 370 mm | 18.0 in · 457 mm | +24% U-360 |
| Turning radius, braked declared | 9.7 ft · 2.95 m | 9.7 ft · 2.95 m | — |
| Fuel tank declared | — | 56.0 qt · 53.0 L | — |
Fiat 400 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 400/400 DT”
UTB U-360 sources
Source
- Source: Traktorenlexikon, “UTB U 360”
- Source: Traktorenlexikon, “UTB U 453 DT”