Fiat 400 (DT) vs Güldner G 35 (S)

11 material differences · fewer than 12

Tractor one

1968–1974

No measured PTO figure

Tractor two

1967–1969

No measured PTO figure

Which should you choose?

Read our verdict on the 400 (DT) and the G 35 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 400 (DT) and Güldner G 35 (S), field by field
Field	400 (DT)	G 35 (S)	Gap
Engine
Engine power, claimed claimed	34.5 hp	34.3 hp	—
Engine declared	FIAT-IVECO 8035.01.201	Güldner 3 L 79	differs
Displacement declared	2.34 L	2.36 L	—
Maximum torque declared	103 lb·ft · 140 N·m	95 lb·ft · 128 N·m	+9% 400 (DT)
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4 mph · 20 km/h	+25% 400 (DT)
Clutch declared	Pedal-operated two-stage dry Feredo double clutch	Pedal-operated dry double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	—	—
Pressure declared	2,843 psi · 196 bar	2,134 psi · 147 bar	+33% 400 (DT)
Three-point lift at ends declared	2,866 lb · 1,300 kg	3,417 lb · 1,550 kg	+19% G 35 (S)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,750 lb · 1,701 kg	4,178 lb · 1,895 kg	+11% G 35 (S)
Maximum permissible mass declared	—	7,055 lb · 3,200 kg	—
Wheelbase declared	75.6 in · 1,920 mm	76.9 in · 1,954 mm	—
Length declared	124.8 in · 3,169 mm	128.0 in · 3,250 mm	—
Width declared	62.4 in · 1,585 mm	65.4 in · 1,662 mm	—
Height declared	67.5 in · 1,715 mm	59.4 in · 1,510 mm	+14% 400 (DT)
Ground clearance declared	14.6 in · 370 mm	15.7 in · 400 mm	+8% G 35 (S)
Turning radius, braked declared	9.7 ft · 2.95 m	10.3 ft · 3.15 m	+7% G 35 (S)

Source

Source