13 material differences
Tractor oneFendt Favorit 822 LSE1993–2004No measured PTO figureTractor twoNew Holland TG 210 (Traktorenlexikon)2002–2005No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 822 LSE and the TG 210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Favorit 822 LSE | TG 210 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207 hp | 207.2 hp | — |
| Engine declared | MAN D 0826 LE 522 | CUMMINS 6 TAA-830 | differs |
| Displacement declared | 6.87 L | 8.27 L | +20% TG 210 |
| Maximum torque declared | 661 lb·ft · 896 N·m | 679 lb·ft · 921 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Wet multi-disc clutch as driving clutch | Electro-hydraulically operated wet Case-IH multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 27.6 gpm · 104.4 L/min | 38.6 gpm · 146.1 L/min | +40% TG 210 |
| Pressure declared | — | 3,031 psi · 209 bar | — |
| Rear PTO speeds declared | 750 rpm / 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,954 lb · 7,690 kg | 20,466 lb · 9,283 kg | +21% TG 210 |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 30,865 lb · 14,000 kg | +17% TG 210 |
| Wheelbase declared | 111.8 in · 2,840 mm | 121.2 in · 3,078 mm | +8% TG 210 |
| Length declared | 194.5 in · 4,940 mm | 227.4 in · 5,775 mm | +17% TG 210 |
| Width declared | 100.4 in · 2,550 mm | 120.0–150.0 in · 3,048–3,810 mm | differs |
| Ground clearance declared | 23.8 in · 605 mm | 13.8 in · 350 mm | +73% Favorit 822 LSE |
| Turning radius, braked declared | 17.7 ft · 5.40 m | — | — |
| Fuel tank declared | 391.0 qt · 370 L | 519.9 qt · 492.0 L | +33% TG 210 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 822 LSE sources
Source
- Source: Traktorenlexikon, “Fendt Favorit 822”
New Holland TG 210 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland TG 210”
- Source: Traktorenlexikon, “Case-IH MX210”