10 material differences · fewer than 12

Tractor oneFendt Favorit 8181993–2002No measured PTO figureTractor twoSteyr 9190 a1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 818 and the 9190 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fendt Favorit 818 and Steyr 9190 a, field by field
FieldFavorit 8189190 aGap
Engine
Engine power, claimed claimed188 hp187.5 hp—
Engine declaredMAN D 0826 LE 521Steyr-VALMET WD 634 DSdiffers
Displacement declared6.87 L7.37 L+7% 9190 a
Maximum torque declared596 lb·ft · 808 N·m583 lb·ft · 790 N·m—
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9 mph · 40 km/hdiffers
Clutch declaredWet multi-plate clutch as driving clutchPedal-operated dry single-disc clutch as driving clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared26.9 gpm · 102.0 L/min13.9 gpm · 52.8 L/min+93% Favorit 818
Pressure declared2,901 psi · 200 bar2,901 psi · 200 bar—
Rear PTO speeds declared750/1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,932 lb · 7,680 kg13,889 lb · 6,300 kg+22% Favorit 818
Maximum permissible mass declared26,455 lb · 12,000 kg24,251 lb · 11,000 kg+9% Favorit 818
Wheelbase declared111.8 in · 2,840 mm115.2 in · 2,925 mm—
Length declared194.5 in · 4,940 mm203.3 in · 5,165 mm—
Width declared100.4 in · 2,550 mm96.5 in · 2,450 mm—
Ground clearance declared23.8 in · 605 mm19.7 in · 500 mm+21% Favorit 818
Turning radius, braked declared17.7 ft · 5.40 m——
Fuel tank declared391.0 qt · 370 L332.9 qt · 315.0 L+17% Favorit 818

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 818 sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 818”

Steyr 9190 a sources

Source
  • Source: Traktorenlexikon, “Steyr 9190 a”