- Rigid chassis
- WhichTractor size: High-power
- No lab test on file
- 1993–1995
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Steyr 9190a specs: hp, weight, years
Steyr-VALMET WD 634 DS six-cylinder diesel. The manufacturer claimed 187.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
187.5 hp
139.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 9190 a”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 13,889 lb
- 3-point lift
- 15,873 lb
- Hyd. flow
- 13.9 gpm
- Top speed
- 24.9 mph
Steyr 9190a specs: key facts
The Steyr 9190a was built from 1993 to 1995.
The Steyr 9190a has a claimed engine power (gross or net not stated) of 139.8 kW (187.5 hp); it has no measured PTO figure.
The Steyr 9190a is four-wheel drive (4WD).
The Steyr 9190a has a Steyr-VALMET WD 634 DS engine, a 6-cylinder 7.37 L diesel unit.
The Steyr 9190a weighs 6,300 kg (13,889 lb) unladen.
The Steyr 9190a has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Steyr 9190a lifts 7,200 kg (15,873 lb) at the lower-link ends.
The hydraulic pump of the Steyr 9190a delivers 52.8 L/min (13.9 gpm).
Source · Traktorenlexikon, “Steyr 9190 a”
How does the 9190a compare with its class?
- Limitation:
A hydraulic pump flow of 52.8 L/min is low for its class — 50% below the median of 106 L/min across the 92 machines within 10% of its power that hold this figure.
- Strength:
32 forward gears is high for its class — 78% above the median of 18 across the 108 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 6,300 kg is low for its class — 16% below the median of 7,505 kg across the 120 machines within 10% of its power that hold this figure.
- Limitation:
The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 120 tractors within 10% of its power, 13% carry one.
Derived by WhichTractor from 120 comparable records. How we work this out
How much horsepower does a 9190a have?
The only figure for the 9190a is 187.5 hp (139.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr 9190 a”
What engine is in a 9190a?
A 9190a has a Steyr-VALMET WD 634 DS, a 6-cylinder 7.37 L diesel engine.
| Make & model | Steyr-VALMET WD 634 DS |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 449.4 ci · 7.37 L |
| Max torque | 583 lb·ft · 790 N·m @ 1,400 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr 9190 a”
How much will a 9190a lift, and what is its hydraulic flow?
A 9190a lifts 15,873 lb (7,200 kg) at the lower-link ends.
| Pump flow | 13.9 gpm · 52.8 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Lift at ends | 15,873 lb · 7,200 kg |
| Rear PTO | 540/1000 rpm @ 1,993 engine rpm |
Source · Traktorenlexikon, “Steyr 9190 a”
What transmission does a 9190a have?
Transmission specifications for the 9190a are below.
| Clutch | Pedal-operated dry single-disc clutch as driving clutch |
|---|---|
| Steering | Hydrostatic DANFOSS steering, type OSPC 200 LS |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “Steyr 9190 a”
How much does a 9190a weigh?
A 9190a weighs 13,889 lb (6,300 kg) unladen.
| Unladen weight | 13,889 lb · 6,300 kg |
|---|---|
| Maximum permissible mass | 24,251 lb · 11,000 kg |
| Wheelbase | 115.2 in · 2,925 mm |
| Length | 203.3 in · 5,165 mm |
| Width | 96.5 in · 2,450 mm |
| Height | 114.4 in · 2,905 mm |
| Ground clearance | 19.7 in · 500 mm |
| Front track | 76.8 in · 1,950 mmWikibooks gives one track for both axles |
| Rear track | 76.8 in · 1,950 mmWikibooks gives one track for both axles |
Source · Traktorenlexikon, “Steyr 9190 a”
What oil does a 9190a take, and how much?
Fluid capacities for the 9190a are below.
| System | Capacity |
|---|---|
| Hydraulic | 92.5 qt · 87.5 LSource: Traktorenlexikon, “Steyr 9190 a” · single source, not independently verified |
| Front axle | 11.6 qt · 11.0 LSource: Traktorenlexikon, “Steyr 9190 a” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 9190a?
Within 10% of its 187.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fiat G 190187.5 hp engine, claimed · 1993–2002Side by side with the 9190a →
- John Deere 4760 (A)187.5 hp engine, claimed · 1992–1994Side by side with the 9190a →
- Massey Ferguson 3690 (A)187.5 hp engine, claimed · 1990–1995Side by side with the 9190a →
- Steyr-Case 9200a187.5 hp engine, claimed · 1997–1999Side by side with the 9190a →
- Ford 8770187.3 hp engine, claimed · 1993–1999Side by side with the 9190a →
- New Holland 8770A187.3 hp engine, claimed · 1993–2002Side by side with the 9190a →
Common questions about the Steyr 9190a
Is a 9190a two-wheel drive or four-wheel drive?
The Steyr 9190a is four-wheel drive (4WD).
What PTO does a 9190a have?
A 9190a has a 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Steyr 9190 a”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 9190 a — CC BY-SA 4.0, WIKIBOOKS-TL-108128 · revision 993764. Wikibooks contributors (Traktorenlexikon). Original document