Fendt Favorit 818 or Steyr 9190 a?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 818 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Favorit 818 suits loader and hydraulic implement work better on this data: 93% (49.2 L/min / 13.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Favorit 818 and Steyr 9190 a, with the call on each
QuestionFavorit 8189190 aCall
Which puts more power through the PTO shaft?140 kW (188 hp)Traktorenlexikon, “Fendt Favorit 818”139.8 kW (187.5 hp)Traktorenlexikon, “Steyr 9190 a”Not comparableNot comparable on power at the PTO shaft: the Favorit 818 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 818 and the 9190 a.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Favorit 818 and the 9190 a.
Which pumps more oil for implements?102.0 L/min (26.9 gpm)Traktorenlexikon, “Fendt Favorit 818”52.8 L/min (13.9 gpm)Traktorenlexikon, “Steyr 9190 a”AheadThe Fendt Favorit 818 has 93% more hydraulic flow (49.2 L/min / 13.0 gpm) than the Steyr 9190 a (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?7,200 kg (15,873 lb)Traktorenlexikon, “Steyr 9190 a”No figureNo call on three-point lift: no figure on record for the Favorit 818.
Which is heavier, for traction?7,680 kg (16,932 lb)Traktorenlexikon, “Fendt Favorit 818”6,300 kg (13,889 lb)Traktorenlexikon, “Steyr 9190 a”Ahead (a fact, not an advantage)The Fendt Favorit 818 is 22% heavier (1,380 kg / 3,042 lb) than the Steyr 9190 a (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Fendt Favorit 818”11,000 kg (24,251 lb)Traktorenlexikon, “Steyr 9190 a”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?44Traktorenlexikon, “Fendt Favorit 818”32Traktorenlexikon, “Steyr 9190 a”AheadThe Fendt Favorit 818 has 38% more forward gears (12 gears) than the Steyr 9190 a (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Fendt Favorit 818”No figureNo call on a creeper range: not stated for the 9190 a.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 818”40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9190 a”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?750/1000 rpmTraktorenlexikon, “Fendt Favorit 818”540/1000 rpmTraktorenlexikon, “Steyr 9190 a”DifferPTO speeds differ: the Fendt Favorit 818 750/1000 rpm and the Steyr 9190 a 540/1000 rpm — each offers a speed the other does not; which matters depends on the implement.
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Favorit 818 and the 9190 a.
Which drives on both axles?4WDTraktorenlexikon, “Fendt Favorit 818”4WDTraktorenlexikon, “Steyr 9190 a”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–20021993–1995EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Favorit 818 has 93% more hydraulic flow (49.2 L/min / 13.0 gpm) than the Steyr 9190 a (both pump flow, as stated by the source).
  • The Fendt Favorit 818 is 22% heavier (1,380 kg / 3,042 lb) than the Steyr 9190 a (both unladen weight, as stated by the source).
  • The Fendt Favorit 818 has 38% more forward gears (12 gears) than the Steyr 9190 a (both forward gears, as stated by the source).
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • PTO speeds differ: the Fendt Favorit 818 750/1000 rpm and the Steyr 9190 a 540/1000 rpm — each offers a speed the other does not; which matters depends on the implement.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Favorit 818 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources