Fendt Favorit 711 Vario or J.I. Case 2096 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 711 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2096 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt Favorit 711 Vario suits loader and hydraulic implement work better on this data: 26% (22.9 L/min / 6.0 gpm) more hydraulic flow.
- The Fendt Favorit 711 Vario suits road haulage better on this data: 67% (20.0 km/h / 12.4 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Favorit 711 Vario | 2096 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 84.8 kW (113.7 hp)Traktorenlexikon, “Fendt Favorit 711 Vario” | 85.1 kW (114.1 hp)Traktorenlexikon, “Case 2096” | Not comparableNot comparable on power at the PTO shaft: the Favorit 711 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2096 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 711 Vario and the 2096 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Favorit 711 Vario and the 2096 (DT). |
| Which pumps more oil for implements? | 110.0 L/min (29.1 gpm)Traktorenlexikon, “Fendt Favorit 711 Vario” | 87.1 L/min (23.0 gpm)Traktorenlexikon, “Case 2096” | AheadThe Fendt Favorit 711 Vario has 26% more hydraulic flow (22.9 L/min / 6.0 gpm) than the J.I. Case 2096 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 3,742 kg (8,250 lb)Traktorenlexikon, “Case 2096” | No figureNo call on three-point lift: no figure on record for the Favorit 711 Vario. |
| Which is heavier, for traction? | 5,650 kg (12,456 lb) to 6,170 kg (13,603 lb)Traktorenlexikon, “Fendt Favorit 711 Vario” | 5,386 kg (11,874 lb)Traktorenlexikon, “Case 2096” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 9,500 kg (20,944 lb)Traktorenlexikon, “Fendt Favorit 711 Vario” | — | No figureNo call on maximum permissible mass: no figure on record for the 2096 (DT). |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “Fendt Favorit 711 Vario” | 12 forwardTraktorenlexikon, “Case 2096” | DifferTransmissions differ in kind: the Fendt Favorit 711 Vario is stepless (CVT) and the J.I. Case 2096 (DT) has 12 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Favorit 711 Vario and the 2096 (DT). |
| Which is faster on the road? | 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 711 Vario” | 30 km/h (18.6 mph)Traktorenlexikon, “Case 2096” | AheadThe Fendt Favorit 711 Vario has 67% more top speed (20.0 km/h / 12.4 mph) than the J.I. Case 2096 (DT) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpm / 750 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 711 Vario” | 540/1000 rpmTraktorenlexikon, “Case 2096” | AheadThe Fendt Favorit 711 Vario offers 750 rpm at the PTO, which the J.I. Case 2096 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Case 2096” | No figureNo call on PTO independence: not stated for the Favorit 711 Vario. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fendt Favorit 711 Vario” | Two-wheel or four-wheel driveTraktorenlexikon, “Case 2096” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1999– | 1984–1985 | Ahead (a fact, not an advantage)The Fendt Favorit 711 Vario is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt Favorit 711 Vario has 26% more hydraulic flow (22.9 L/min / 6.0 gpm) than the J.I. Case 2096 (DT) (both pump flow, as stated by the source).
- The Fendt Favorit 711 Vario has 67% more top speed (20.0 km/h / 12.4 mph) than the J.I. Case 2096 (DT) (both top speed forward, as stated by the source).
- The Fendt Favorit 711 Vario offers 750 rpm at the PTO, which the J.I. Case 2096 (DT) does not (as stated by the sources).
- The Fendt Favorit 711 Vario is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Fendt Favorit 711 Vario is stepless (CVT) and the J.I. Case 2096 (DT) has 12 forward gears — not called.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Favorit 711 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2096 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources